Groove specifications
Please always state the groove design and associated values. These are specific to individual plant.
These specifications are usually in the elevator manual. Please make sure the documentation applied is up to date.
We also need a variety of data, depending on the groove design:
A: V-groove with undercut:
please state correct values for:
| Name | Symbol | Unit |
| V-angle gamma | Y | [Degrees] |
| Undercut angle alpha | α | [Degrees] |
| Undercut width | b | [mm] |
B: Round groove with undercut:
please stat correct values for:
| Name | Symbol | Unit |
| Undercut angle Alpha | α | [Degrees] |
| Undercut width | b | [mm] |
C: V-groove:
please state correct values for:
| Name | Symbol | Unit |
| V-angle gamma | Y | [Degrees] |
No traction sheave can be made without these specifications.
AWe will harden traction sheaves if desired. Click "harden" if you want this included in our offer.Click 1 or 2 rope clamps if you want rope clamps included in our offer.